Polymer 80 G-26 PF940SC Completion kit 9MM.

This is a complete G-26 PF940SC build kit. It includes all the necessary parts to finish your build.

Black Standard Slide for G-26

• Front & Rear serrations
• 416 Steel
• DLC Finish
• Fits Gen 1-3 builds

Live Free Armory Elite Series Slide for G-26

• 416R Steel
• Cerakoted Black
• Trijicon RMR Cut
• Gen 1-3 compatibility
• Does fit P80 Frames
• Accepts standard Glock sights and will also accept aftermarket rear sight
• Accepts all standard and most aftermarket G26 components
• Made in the USA!

Nitride Barrel for G-26

• 4150 Chromemoly Vanadium
• 1:16 Twist
• 9mm
• 3.4″ Length
• Will work with Glocks Gen 1-4, as well as Polymer 80 PF940SC.
• The Locking lug under the barrels are different for the Gen 5 Glock pistols, so our barrels will NOT fit the Gen 5 model. Only Gen 1 through 4.

Threaded Black Nitride for G26

• 4150 Black Nitride Barrel
• 1:16 Twist
• 9 MM Caliber
• Threaded
• Thread Pitch 1/2 X 28
• Gen 1-5 Compatible
• Will work with Polymer 80 PF940SC

Stainless Steel for G-26

• 416R Stainless Steel Barrel
• 1:16 Twist
• 9 MM Caliber
• Gen 1-5 Compatible
• Will work with Polymer 80 PF940SC

Aim Arms Slide Parts Kit Glock G 26 upper parts kit Stainless Steel Guide Rod

• Stainless Steel Recoil Spring Assembly
• Channel Liner
• Extractor
• Firing Pin
• Spring Slide Cover Plate
• Extractor
• Depressor Plunger Spring
• Spring Loaded Bearing
• Firing Pin
• Firing Pin Spring
• Spacer Sleeve
• Firing Pin Spring Cups

Aim Arms Frame Parts Kit G-26

• Connector
• Slide Stop Release with Spring
• Locking Block Pin
• Magazine Release
• Magazine Release Spring
• Slide Lock
• Slide Lock Spring
• Trigger Housing Pin
• Trigger Housing with Ejector (May be from Polymer80 depending on inventory)
• Trigger Pin
• Trigger Spring
• Trigger with Trigger Bar

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Aim Arms is not affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components.

Disclaimer:

This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product. **It is recommended to pass 150-200 rounds of full power ammo for the break in period**